Welch Vacuum 8925 Direct Drive Rotary Vane Pump - Manual (Page 2)

INSTRUCTION
WARNING AND CAUTION
PLEASE READ BEFORE OPERATION
While reading your manual, please pay close attention to areas labeled:
WARNING AND CAUTION.
The description of each is found below.
These units confirm to the SI International system of units of measurement.
The following symbols (with recommendation of IEC1010 ) of warning will be found on the pump.
Caution - refer to accompanying documents
Caution - risk of electrical shock
Caution - hot surface
2
WARNING
Warnings are given where failure to observe instruction could
result in injury or death to people.
WARNING
Motor includes a self resetting thermal cutout and the pump could
restart without actuation under fault condition.
CAUTION
Cautions are found where failure to observe the
instruction could result in damage to the equipment,
associated equipment and process.