Lubrication, Installing replacement door gasket (if required) – Victory FS-3N-S1 User Manual
Page 14
Lubrication
Unless otherwise specified, all Victory refrigerators and freezers are equipped with permanently lubricated motors. The
compressor-motor is a sealed unit and is constantly lubricated when in operation. The condenser and evaporator fan
motors are also equipped with lubricated bearings which never need to be oiled.
Installing Replacement Door Gasket (if required)
Removing
Beginning at one corner, pry the gasket loose from the retaining strip. Peel remainder of the gasket from the door and
discard.
Replacing
Before replacing, be sure the gasket and door are at room temperature. (If necessary, soak the gasket in warm water
to make it more pliable.) Align the new gasket frame on the door retainer strip. Starting at one corner, press each
corner of the gasket into the retainer strip. Once started, the gasket can be easily inserted around the entire perimeter
of the door by simply press rolling into place.
9
Door Gasket & Retainer Strip
- FS-2N-S1 FS-1N-S1 FSA-3D-S1-XH FSA-2D-S1-XH FSA-1D-S1-XH FS-3D-S1-XH FS-2D-S1-XH FS-1D-S1-XH FA-3D-S1 FA-2D-S1 FA-1D-S1 FSA-3D-S1 FSA-2D-S1 FSA-1D-S1 FS-3D-S1 FS-2D-S1 FS-1D-S1 RS-2N-S1-FF RS-1N-S1-FF RS-3N-S1 RS-2N-S1 RS-1N-0S1 RA-3D-S1-EW RA-2D-S-EW RA-1D-S1-EW RSA-3D-S1-EW RSA-2D-S1-EW RSA-1D-S1-EW RS-2D-S1-EW RS-1D-S1-EW RA-3D-S1 RA-2D-S1 RA-1D-S1 RSA-3D-S RSA-2D-S1 RSA-1D-S1 RS-2D-S1 RS-1D-S1