Teledyne GFC-7000T - Trace CO2 Analyzer - addendum User Manual

Page 2

Model GFC7000T Carbon Dioxide Analyzer

Teledyne Analytical Instruments

All Rights Reserved. No part of this manual may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any other language or computer language in whole or in part, in any
form or by any means, whether it be electronic, mechanical, magnetic, optical, manual, or otherwise,
without the prior written consent of Teledyne Analytical Instruments, 16830 Chestnut Street, City of
Industry, CA 91748.

Warranty

This equipment is sold subject to the mutual agreement that it is warranted by us free from defects of
material and of construction, and that our liability shall be limited to replacing or repairing at our
factory (without charge, except for transportation), or at customer plant at our option, any material or
construction in which defects become apparent within one year from the date of shipment, except in
cases where quotations or acknowledgements provide for a shorter period. Components manufactured
by others bear the warranty of their manufacturer. This warranty does not cover defects caused by wear,
accident, misuse, neglect or repairs other than those performed by Teledyne or an authorized service
center. We assume no liability for direct or indirect damages of any kind and the purchaser by the
acceptance of the equipment will assume all liability for any damage which may result from its use or
misuse.

We reserve the right to employ any suitable material in the manufacture of our apparatus, and to make
any alterations in the dimensions, shape or weight of any parts, in so far as such alterations do not
adversely affect our warranty.

Important Notice

This instrument provides measurement readings to its user, and serves as a tool by which valuable data can
be gathered. The information provided by the instrument may assist the user in eliminating potential
hazards caused by his process; however, it is essential that all personnel involved in the use of the
instrument or its interface be properly trained in the process being measured, as well as all instrumentation
related to it.

The safety of personnel is ultimately the responsibility of those who control process conditions. While
this instrument may be able to provide early warning of imminent danger, it has no control over process
conditions, and it can be misused. In particular, any alarm or control systems installed must be tested
and understood, both as to how they operate and as to how they can be defeated. Any safeguards
required such as locks, labels, or redundancy, must be provided by the user or specifically requested of
Teledyne at the time the order is placed.

Therefore, the purchaser must be aware of the hazardous process conditions. The purchaser is
responsible for the training of personnel, for providing hazard warning methods and instrumentation per
the appropriate standards, and for ensuring that hazard warning devices and instrumentation are
maintained and operated properly.

Teledyne Analytical Instruments, the manufacturer of this instrument, cannot accept responsibility for
conditions beyond its knowledge and control. No statement expressed or implied by this document or
any information disseminated by the manufacturer or its agents, is to be construed as a warranty of
adequate safety control under the user’s process conditions.

Trademarks

All trademarks, registered trademarks, brand names or product names appearing in this document are
the property of their respective owners and are used herein for identification purposes only.