Teledyne GC-Pro - Gas Chromatograph - HMI Remote Access - Manual (Page 12)

Configuration Model GC PRO
Teledyne Analytical Instruments 6
3.2 Settings to Enable VNC Viewer on IPHONE
1. Make sure Wi-Fi is enabled. The small pie icon must be
shown in the status bar
2. Run VNC client viewer application (current setup is tested
with Mocha VNC lite)
3. Go to Configuration.
Figure 3-4: VNC Client Configuration Screen on
IPHONE
4. Enter the IP address of the HMI5070TH in the VNC
IPHONE setting (Point 1)
5. Make sure that server port is 5900
6. Insert the password (Point 3) of VNC server HMI5070TH
7. Go back to VNC menu and click on connect button.