Teledyne 9060L - Zirconium oxide flue gas oxygen analyzer - Manual (Page 44)

Appendix Model 9060L
Teledyne Analytical Instruments 44
A.2 Probe Specifications
Application:
Combustion flue below 700°C (1290°F),
above 700°C (1290°F) 900°C (1650°F) — no
contaminants.
With contaminants see notes 1 &2
Temperature Range:
0-900°C 800-1400°C 800-1200°C
(32-1650°F) (1470-2550°F) (1470-2190°F)
Length:
250-1000 mm 500-1160 mm 457-1219 mm
(10” to 40”) (20” to 46”) (18” to 48”)
Process Connection:
1 1/2" BSP 3/4" BSP 1" BSP or equivalent
NPT
Electrical Connection: Weatherproof plug-in connector or
optional screw terminals. Plug connector
supplied with the cable. Ex d heads have
screw terminals.
Cable: Order a specific length with the analyzer
except for hazardous installations where
the cable is supplied by the customer.
Heater: Yes
Flue Gas Thermocouple: K
Response Time:
Typically < 4 secs.
Head Temperature: 125°C (250°F)
Reference Gas: Ambient air 50 to 500 cc/min (6 to 60
scfm). Pump supplied with analyzer
Ref Air Connection: 1/4" NPT integral air line in probe cable.
Barbed fitting to 3/16" ID PVC tube.
Filter:
Removable sintered stainless steel
particulate filter, 15 micron.
Calibration Gas Connection: 1/8" NPT female 1/8" NPT female 1/8"
NPT female
Weight :
0.6 kg (1.32 lbs.)