ATON AH66T User Manual

Page 81

A T O N

AH66T

INSTALLATION MANUAL

Page 80

Scan Presets Command

Description: Scans through presets. Plays the station for 10 seconds and then goes to the

next station. This continues until another command is sent to the tuner.

Examples:

&AH66,R1,SCAN,UP

Starts CHASSIS ONE’S (R1) radio SCANNING (SCAN)
UP (UP).

&AH66,R2,SCAN,DOWN

Starts CHASSIS TWO’S (R2) radio SCANNING (SCAN)

DOWN (DOWN).

When another command is sent to the tuner, it will stop scanning and execute the next
command.

It is recommended to use the CANCEL command to stop scanning to avoid any
unintended result. See page 74 for the CANCEL command.

Seek Command

Description: Tunes the radio to the next valid station.

Examples:

&AH66,R1,SEEK,UP

TUNES (SEEK) CHASSIS ONE’S (R1) radio to the next

valid station of a HIGHER FREQUENCY (UP).

&AH66,R2,SEEK,DOWN

TUNES (SEEK) CHASSIS TWO’S (R2) radio to the next
valid station of a LOWER FREQUENCY (DOWN).

Prefix

Parameter 1

Group

Parameter 2

&AH66

R1/R2

SCAN

UP/DOWN