ATON AH66T User Manual

Page 63

A T O N

AH66T

INSTALLATION MANUAL

Page 62

Source Select Control

Description: Selects the source in a zone. Status can be queried.

Examples:

&AH66,AUD,2,1 Selects SOURCE (AUD) ONE (1) in ZONE TWO (2).

&AH66,AUD,5,2 Selects SOURCE (AUD) TWO (2) in ZONE FIVE (5).

&AH66,AUD,11,R1 Selects the INTERNAL RADIO of CHASSIS ONE (R1) in ZONE

ELEVEN (11).

&AH66,AUD,8,? QUERIES (?) the SELECTED SOURCE (AUD) in ZONE EIGHT (8).

Possible QUERY responses are:*AH66,AUD,8,0, *AH66,AUD,8,1, etc., where 0=Zone is

OFF, 1=Source one, 2=Source two, 3=Source three, 4=
Source four, 5=Source five, 6=Source six, R1=CHASSIS 1’s

Internal Radio, R2=CHASSIS 2’s Internal Radio.

Stereo / Mono Control

Description: Sets a zone to Stereo or Mono, or TOGGLES the state. Status can be queried.

Examples:

&AH66,STMO,6,0

Sets the STEREO/MONO (STMO) setting of ZONE SIX (6) to

STEREO (0).

&AH66,STMO,2,1

Sets the STEREO/MONO (STMO) setting of ZONE TWO (2) to

MONO (1).

&AH66,STMO,3,2

TOGGLES (2) the STEREO/MONO (STMO) setting of ZONE
THREE (3).

&AH66,STMO,5,?

QUERIES (?) the STEREO/MONO (STMO) setting of ZONE FIVE

(5).

Possible QUERY responses are:*AH66,STMO,5,0 or *AH66,STMO,5,1 where 0=STEREO

and 1=MONO.

Prefix

Command

Parameter 1

Zone #

Parameter 2

Source

&AH66

AUD

1-12

0-6/R1/R2/?