AKG Acoustics C747 V11 - Manual (Page 16)

4 Using the Microphone
All supplied mounting accessories have 3/8" inside and/or outside threads, so you
can screw the H 47 mic clamp as well as the MSH 70 gooseneck on to any stan-
dard floor or table stand.
• To fix any of the supplied mounting accessories to a 5/8" thread, use a com-
mercial 3/8" to 5/8" thread adapter.
• Use the SA 80 to clamp the microphone on a desktop, microphone stand, flats,
or other parts of a stage set up to 0.8 in./20 mm in thickness or diameter.
1. Use a screwdriver or coin to remove the connecting screw (1).
2. Insert the SHZ 80 screw link (2) into the hole in the fin (3).
3. Screw the gooseneck (4) on.
C 747 V11 16
4.1 Mounting
Note:
Fig. 3: Clamping the mi-
crophone on a desktop.
Refer to figs. 3 and 4.
4.1.1 Mounting the
Gooseneck Crosswise
Fig. 5: Mounting the
gooseneck crosswise
on the SA 80 clamp.
Refer to fig. 5a.
Refer to fig. 5b.
Fig. 4: Clamping the microphone on a floor stand.
MSH 70
H 47
SA 80
H 47
SA 80
SHZ 80
MSH 70
a b 1
2
3
4
BDA_C747_D030901_Hex:Layout 1 03/26/2009 10:04 Seite 16 (Schwarz/Black Auszug)