PROLiNK PRO700 EnerHome - Manual (Page 3)

1. CAUTION
English
The UPS battery has been fully charged before leaving our factory. During the shipment,
some level of power may have been discharged. In order to ensure the efficiency of the UPS,
please allow the UPS to charge its battery for at least 12 hours before use.
Connect the UPS to a two-pole, three-wire grounding mains (AC). The AC source must be
connected to appropriate branch protection (fuse or circuit breaker). Connection to any other
type of AC source may result in a shock hazard and may violate your warranty claim.
This UPS has an internal battery and its energy can not be de-energized by the user. The
output may be energized even though when the UPS is not connected to the main AC.
DO NOT install the UPS in locations where there is water or excessive humidity.
DO NOT allow water or any foreign object to enter the UPS or put any objects containing
liquid on or near the UPS.
DO NOT remove the cover. No user serviceable parts. Refer servicing to qualified service
personnel.
DO NOT connect any non-computer peripherals to the UPS. The UPS is designed for use
with computer loads only.
To reduce the risk of overheating the UPS, avoid exposing the unit to direct sunlight. Avoid
installing the unit near heat emitting appliances such as a room heater or stove.
Certificate Number: SGPSGP001496
1