PROLiNK PDC Series - DC UPS - Manual

Solar
PDC Series - DC UPS
PROLiNK DC UPS
PROLiNK DC Series is a compact design of DC UPS system which converts AC power to DC power with dynamic voltage
regulator; the UPS can ensure stable DC power to connected load as utility. This UPS system is an economic ideal for
communication devices such as switch, hub, router and modem.The built-in DC start function enables the UPS to be
started up without supply of AC power. To consider that facilitate and can be used under various circumstances,
PROLiNK DC series has design with a very compact size for locate and storage.
• Dual DC Outputs
• Microprocessor controlled guarantees high reliability
• Compact size for standing and mounting flexibility
• Supports solar powered devices and communication applications
• Auto restart while AC is recovering
• Off-mode charging
• Overload protection and short circuit protection
All specifications, designs and contents are subjected to changes without prior notice
Full Specifications
160 - 280VAC
50 or 60Hz
220VAC Nominal Voltage
Voltage Range
Frenquency
Capacity
12V9AH x 1 Battery Type
Charging Voltage
Charging Current
Typical Recharge Time
INPUT
MODELS
50W
PDC50
OUTPUT
BATTERY
AC Mode
Battery Mode
EFFICIENCY
ENVIRONMENT
PHYSICAL
PROTECTION
Battery Mode
Low Battery
Fault
INDICATION
AC Mode
10V ~ 13.7V
0ms
>75% at Nominal Voltage (Battery Fully Charged)
>95% at Full Load
Output Voltage Regulation
Transfer Time
13.7V ±0.25V
2.8A or 2.3A at Nominal Voltage without Load
4 ~ 6 hours recover to 90% capacity
Green Lighting
Yellow Lighting
Red Lighting
Yellow Flashing
Full Protection Short Circuit and Overload Protection
12VDC Nominal Voltage
228 x 82.5 x 207
0 ~ 90%
0°C ~ 40°C
Humidity
Temperature
3
Dimension (mm) D x W × H @ Vertically Stand
Net Weight (kgs)
PDC50
35