Poweramp HED SERIES HYDRAULIC - Manual (Page 31)

29 Manual No. 4111-0027
Sept. 2009
May 2012
29
OPERATION
A
1. Make certain all equipment and personnel are
clear of leveler before operation.
2. The truck should be firmly against the bump
blocks and wheels chocked before operation of
the leveler.
Figure 1
Figure 2 Figure 3
Figure 4
3. Always remove any end load while leveler is in
stored position. (Figure 1).
4. Press and hold “RAISE” (A) button until leveler
extends fully (Figure 3).
5. Release button. Leveler will lower to truck bed
(Figure 4).
6. To remove leveler from truck before departure,
operate leveler “RAISE” (A) button until lip clears
truck bed, folds up and returns, (Figure 2) then
release button. Leveler will then return to stored
position (Figure 1).
A- Raise Button