Poweramp CM SERIES MECHANICAL - Manual (Page 7)

5
4111-0006 — Sept 2010
Sept 2012
SAFETY
Safety Decals
Every 90 days (quarterly) inspect all safety labels and tags to
ensure they are on the dock leveler and are easily legible. If any
are missing or require replacement, please call 1-800-643-5424
for replacements.
2 . 4 0 "
5.06"
Control Box Size:
Decal Size: 5.06 x 2.40
File Name: 1751-0727 Rev A
DANGER
1751-0727 Rev A
CRUSH HAZARD
M a i n t e n a n c e p r o p m u s t
support leveler behind bar.
Do not force maintenance
prop forward of bar to
s u p p o r t l i p . F a i l u r e t o
comply will result in death or
serious injury. Refer to
owner ’s/user ’s manual for
proper use.
3 . 2 5 "
9.12"
Unsupported dock leveler
ramps can lower unexpectedly.
Before allowing vehicle to leave
the dock always:
! Ensure no equipment,
material or people are on
dock leveler.
! Return dock leveler to its
stored position at dock level.
Failure to follow posted instructions will result in death or serious injur y.
SAFETY INFORMATION
Call 262.255.1510 for replacement placards, warning labels, or owner ’s/user ’s manuals.
Control Box Size:
Decal Size: 9.12 x 3.25
File Name: 1751-0730 Rev A
DANGER OPERATION 7. Stay clear of hinges and front and 1. Read and follow all instructions and sides of moving dock leveler. warnings in owner ’s/user ’s manual. 8. N e v e r u s e d a m a g e d o r 2. Use of dock leveler restricted to malfunctioning dock leveler. Report trained operators problems immediately to supervisor. 3. Always chock trailer wheels or e n g a g e t r u c k r e s t r a i n t b e f o r e MAINTENANCE/SERVICE operating dock leveler or beginning to 1. Read and follow all instructions, load or unload. w a r n i n g s a n d m a i n t e n a n c e 4. Never use hands or equipment to schedules in the owner ’s/user ’s move ramp or lip manual. 5. Before activating dock leveler: 2. Maintenance/Service of dock leveler ¥ Ensure trailer is backed in against restricted to trained personnel. 3. Place barriers on the driveway and bumpers. dock floor to indicate service work is ¥ Remove any end loads if required. being performed. ¥ Check trailer alignment to avoid lip 4. DO NOT ENTER PIT unless dock interference. If lip does not lower to leveler is securely supported by trailer bed, reposition vehicle. maintenance prop. 6. Ensure truck bed supports extended 5. If electrically powered turn off and use lip or leveler frame supports the ramp OSHA lockout/tagout procedures. before driving on ramp.
Control Box Size: Decal Size: 13 x 2 File Name: 1751-0329
DO NOT
FORK THIS SIDE
Control Box Size: Decal Size: 6 x 2 File Name: 1751-0330 REV A
FORK
HERE
1 . 0 2 "
8.72"
Control Box Size:
Decal Size: 8.72 x 1.02
File Name: 1751-0788 Rev A
DANGER
1751-0788 Rev A
CRUSH HAZARD
Do not work under dock leveler unless this maintenance prop has been secured in the upright
position. Failure to comply will result in death or serious injury. See owner ’s/user ’s manual for proper
procedures.
2 . 4 0 "
5.05"
Control Box Size:
Decal Size: 5.05 x 2.40
File Name: 1751-0789
CRUSH HAZARD
Open the pin latch and insert
through the maintenance
prop housing and prop
completely. Close the pin latch
to secure prop. Use every
time dock leveler is serviced.
Failure to comply will result
in death or serious injury.
DANGER
1751-0789
DANGER
1751-0726 Rev A
2 . 3 6 "
5.92"
Control Box Size:
Decal Size: 5.92 x 2.36
File Name: 1751-0726 Rev A
CRUSH HAZARD
DO NOT ENTER PIT unless dock leveler is
safely supported by maintenance prop. Place
barriers on driveway and dock floor to indicate
service work being performed. Failure to comply
will result in death or serious injury. Refer to
owner ’s/user ’s manual for proper maintenance
procedures.
1751-0727
1751-0730
(x2)
1751-0788
1751-0789
1751-0726
1
. 4 3 "
5.93"
Control Box Size:
Decal Size: 5.93 x 1.40
File Name: 1751-0728 Rev A
DANGER
1751-0728 Rev A
CRUSH HAZARD
Do not remove main springs until leveler is securely supported by a
suitable lifting device. Main springs contain stored energy. Be sure springs
are fully unloaded and ends are loose before removal. Failure to comply
will result in death or serious injury. Refer to owner ’s/user ’s manual for
proper maintenance procedure.
1751-0728
(decal placed in same position on both sides)
(decal placed in same position on both sides)
(decal placed in same position on both sides)
1751-0329
(x2)
1751-0330
(x2)