Power Probe PPCT - Continuity Tester - Manual (Page 2)

2
Thank You
Thank You...
for purchasing Power Probe’s Scream’N Continuity Tester
(SCT). We made it
Scream’N
to eliminate the frustration
of working with weak sounding continuity testers. The
SCT volume is adjustable so you can make it scream, or
adjust it for quieter work environments as well. Your new
SCT emits two distinct tones enabling you to differentiate
between circuits above or below 10 ohms. The SCT also
emits a warble tone when it detects over 6 volts.
The SCT has high quality gold plated 4 mm banana jacks
on both the tip and at the end of the green lead ensuring
compatibility with all your standard 4mm plugs, pierc-
ing probes, test leads, etc. The 4mm jacks also make con-
necting your leads and piercing probes a snap. The built
in headlights light up the probe area, thus eliminating the
need for a fl ashlight.
The 10 foot long green lead keeps everthing within reach.
Should you fi nd the need for a longer lead we have included
a 10 foot green extension lead. The SCT is powered by two
AA batteries. The automatic shut-off maximizes battery life.
Safety Tip
Before performing any electrical test Power Probe strongly
recommends you read this instruction booklet carefully.