Alpine 68-21627Z10-A - Manual (Page 18)

18
-EN
The Settings of 5BAND P.EQ/7BAND G.EQ can be stored in the preset
memory.
1
When the settings of P.EQ/G.EQ have been completed,
select any one of the preset buttons (1 through 6) in any
adjusting item of 5BAND P.EQ/7BAND G.EQ (e.g. BAND),
press and hold the desired preset buttons for at least 2
seconds.
2
Turn the Rotary encoder to select PROTECT NO/YES, and
then press
ENTER to store the adjusted contents.
PROTECT NO  PROTECT YES (Initial setting)
Notes
• If YES is selected, the adjusted contents are protected and stored into the
preset buttons. When you want to store the parameter into a protected
preset button, “REPLACE NO/YES” can be selected.
If NO is selected, the preset is stored.
• While performing this operation, all adjusted contents of Parametric
EQ/Graphic EQ will be stored in the preset buttons.
• The stored contents are not deleted even when resetting the unit or
disconnecting the battery.
• The stored contents can be recalled by performing operation (refer to
“Recalling the Stored P.EQ/G.EQ Adjustment Settings (CDE-HD138BT
Only)” on page 18).
The stored Settings of 5BAND P.EQ/7BAND G.EQ that are stored in the
preset memory.
After selecting any adjusting item of 5BAND P.EQ/7BAND
G.EQ (e.g. BAND), press any one of the preset buttons (1
through 6) that has your desired characteristic in memory
to recall the stored settings.
Note
• While performing this operation, all adjustment contents of Parametric
EQ/Graphic EQ stored in the preset buttons will be recalled, and
demonstrated automatically.
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The FM radio, CD, and iPod, etc. will be
able to reproduce the music clearly even in cars with a lot of road noise.

Setting item: MX SETTING
1
Turn the Rotary encoder to select the source to which you
want to apply Media Xpander, and then press
ENTER.
ANALOG TU
*1
 HD1
*2
 HD2
*3
 HD3&OTHER
*4
 SIRIUSXM
 CD  CMPM *5  USB  iPod  BT AUDIO  BT PANDORA
 AUX  PHONE HFP *6
*1 Be applied for FM radio (analog mode).
*2 Be applied for the Main-Program Service channel (HD Radio
mode).
*3 Be applied for the first Sub-Program Service channel (Program
No.2) (HD Radio mode).
*4 Be applied for other Sub-Program Service channels (Program
No.3-8) (HD Radio mode).
*5 Be applied for MP3/WMA/AAC files in disc.
*6 Be applied for hands-free phone.
2
Turn the Rotary encoder to select the Media Xpander
level, and then press
ENTER.
LEVEL OFF  LEVEL 1  LEVEL 2  LEVEL 3  CUSTOM
Customizing the Media Xpander setting
If CUSTOM is selected in step 2, you can modify the Media Xpander to
suit your personal preference.
3
Turn the Rotary encoder to select the Band, and then
press
ENTER. BAND1 (Lower frequencies)  BAND5
(Higher Frequencies)
BAND1 (Bass)  BAND2 (Mid Bass)  BAND3 (Mid) 
BAND4 (Mid High)  BAND5 (High)
4
Turn the Rotary encoder to select the setting item, and
then press
ENTER.
HARMONIC  LEVEL
5
Turn the Rotary encoder to make the setting, and then
press
ENTER.
HARMONIC
*
: LOW/HIGH
LEVEL: 0 ~ +10
* You can adjust the level of harmonic through this setting.
6
Repeat steps 3 to 5 to complete the setting of other bands.
You can modify the Equalizer settings to create a response curve more
appealing to your personal taste. The setting of Bass, Mid and Treble can
be adjusted in this mode.

Setting item: 3BAND EQ

Further setting items: BASS / MID / TREBLE
Setting the Bass Control
1
After selecting BASS from the 3BAND EQ adjustment
mode, turn the Rotary encoder to select the desired item,
and then press
ENTER.
WIDTH (Q)  CENTER FRQ  LEVEL
2
Turn the Rotary encoder to select the desired setting
value, and then press
ENTER.
3
Press  to return to the previous step.

Setting the Bass Bandwidth (WIDTH (Q))
Turn the Rotary encoder to select the desired bass
bandwidth.
WIDE 0.50  MEDIUM 1.00  MEDIUM 1.50  NARROW 2.00
Change the boosted bass bandwidth to wide or narrow. A wider setting
will boost a wide range of frequencies above and below the center
frequency. A narrower setting will boost only frequencies near the
center frequency.
Storing the P.EQ/G.EQ Settings
(CDE-HD138BT Only)
Recalling the Stored P.EQ/G.EQ
Adjustment Settings
(CDE-HD138BT Only)
Setting the Media Xpander mode
(CDE-HD138BT Only)
Adjusting the Parametric Equalizer Curve
(3BAND EQ) (CDE-HD137BT Only)