beautypg.com

5 jumperfree configuration, Palette snooping [disabled, Irq xx [available – Asus K8V User Manual

Page 92: Cpu fsb frequency [200mhz, Vcore offset [none, Ddr voltage [auto, Agp voltage [1.5v, 26 chapter 4: bios setup

background image

4-26

Chapter 4: BIOS Setup

4.4.5 JumperFree Configuration

Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit

CPU FSB Frequency

[200MHz]

VCORE Offset

[None]

DDR Voltage

[Auto]

AGP Voltage

[1.5V]

V-Link Voltage

[2.5V]

Performance Mode

[Standard]

Configure System Frequency/Voltage

Palette Snooping [Disabled]

When set to [Enabled], the pallete snooping feature informs the PCI
devices that an ISA graphics device is installed in the system so that the
latter can function correctly. Setting to [Disabled] deactivates this feature.
Configuration options: [Disabled] [Enabled]

IRQ xx [Available]

When set to [Available], the specific IRQ is free for use of PCI/PnP
devices. When set to [Reserved], the IRQ is reserved for legacy ISA
devices. Configuration options: [Available] [Reserved]

CPU FSB Frequency [200MHz]

This item allows you to adjust the CPU FSB operating frequency.
Configuration options: [200MHz] [201 MHz] ~ [260MHz]

VCORE Offset [None]

This item allows you to set a specific VCore offset voltage.
Configuration options: [None] [100mV] [200mV] [300mV]

DDR Voltage [Auto]

This item allows you to automatically detect or select from a list the DDR
operating voltage. Configuration options: [Auto] [2.6V] [2.7V] [2.8V]

AGP Voltage [1.5V]

This item adjusts the AGP voltage setting.
Configuration options: [1.5V] [1.7V]

This manual is related to the following products: