Crc flood enable [disabled, Ht frequency [800 mhz, Ht data width (upstream) [16 bit – Asus K8V User Manual
Page 80: Ht data width (downstream) [16 bit, 14 chapter 4: bios setup
4-14
Chapter 4: BIOS Setup
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
HT Tristate Enable
[Enabled]
CRC Flood Enable
[Disabled]
HT Frequency
[800 MHz]
HT DATA Width(Upstream)
[16 BIT]
HT DATA Width(Downstream)
[16 BIT]
HyperTransport Configuration
4.4.1.1
HyperTransport Configuration
HT Tristate Enable [Enabled]
This item enables or disables the HyperTransport Tristate that enables the
tristate link during the disconnected state of an LDTSTOP.
Configuration options: [Disabled] [Enabled]
CRC Flood Enable [Disabled]
This item enables or disables the CRC Flood that enable the generation of
syncronized packets on CRC Error.
Configuration options: [Disabled] [Enabled]
HT Frequency [800 MHz]
This item allows frequency selection of HyperTransport transfer from K8
CPU to AGP. Configuration options: [200 MHz] [400 Mhz] [600 Mhz] [800
Mhz]
HT DATA Width (Upstream) [16 BIT]
This item allows selection of HyperTransport upstream data width.
Configuration options: [16 BIT] [8 BIT]
HT DATA Width (Downstream) [16 BIT]
This item allows selection of HyperTransport downstream data width.
Configuration options: [16 BIT] [8 BIT]