Service programmes, Cleaning and service short rinse milk system, Start calc‘nclean – Bosch TES80359DE VeroSelection 300 Kaffeevollautomat Front Edelstahl Gehäuse hochglanz anthrazit User Manual
Page 52

48
Robert Bosch Hausgeräte GmbH
en
Service Programmes
Tip: Refer also to the quick reference guide
in the storage compartment
22.
At regular intervals, the display
5 shows the
following texts:
Short rinse milk system
or
Service - Descale
or
Service - Clean
or
Service - Calc‘nClean
.
The appliance should be cleaned or descaled
immediately using the corresponding
programme. You have the option of com-
bining the processes
Descaling
and
Cleaning
with the
Calc‘nClean
func-
tion (see “ Calc‘nClean”). If the service
programme is not run as instructed, the
appliance may be damaged.
¡
Warning!
Follow the instructions for using the
descaling and cleaning agents for each
service programme. Never interrupt the
service programme!
Do not drink the liquids!
Never use vinegar, vinegar-based products,
citric acid or citric acid-based products!
Never put descaling tablets or other
descaling agents in the powder compart-
ment
18!
Before starting the respective service
programme (descaling, cleaning or
Calc‘nClean), remove the brewing unit,
clean as instructed and replace.
Specially developed and suitable descal-
ing and cleaning tablets are available
from retailers or customer service (see
“Accessories”).
Cleaning the milk system
Duration: approx. 1 minute
Cleaning and service
Short rinse
milk system
start
Calc‘nClean
The milk system
10 can be pre-cleaned
automatically.
● Press the
à
button
3.
Short rinse milk system
start
● Press the
start button 8.
Place glass under frother, place
suction pipe in glass
start
● Place an empty glass under the milk
system
10 and put the end of the pipe
10d in the glass.
● Press the
start button 8. The milk system
is cleaned automatically.
● Now empty the glass and clean the
suction pipe
10d.
In addition to this, clean the milk system
thoroughly at regular intervals (by hand or
in the dishwasher).