Perma Pure Mini-GASS 2812T - Manual (Page 2)

2 Mini-GASS User Manual
1. Introduction.....................................................................................................................6
2. Mini-GASS Components.................................................................................................7
2.1 Probe (Optional)
2.2 Probe Blowback (Optional)
2.3 Filtration
2.4 Automatic Filter Drain (Optional)
2.5 Sample Pump (Optional)
2.6 Nafion Dryer
2.7 Ammonia Scrubber (Optional)
2.8 Purge Air Dryer (Optional)
2.9 Purge Air Eductor (Optional)
2.10 Z-Purge (Optional)
3. Installation.....................................................................................................................10
3.1 Mounting
3.2 Electrical Connection
3.3 Plumbing
a. Sample Connection
b. Purge Connection
c. Filter Drain Connection (Optional)
d. Purge Exhaust
e. Purge Eductor Inlet Connection (Optional)
f. Steam Connection (Optional)
4. Start-Up Procedure........................................................................................................14
4.1 Setup Check
4.2 Automatic Filter Drain Control (Optional)
4.3 Temperature Control
a. PID Electronic Temperature Control
b. Steam Temperature Control
c. Safety Interlocks (SIS2/SIVS2)
4.4 Preheating the System
5. System Fine Tuning.......................................................................................................17
5.1 Steam Heated Systems
5.2 Electrically Heated Systems
6. Maintenance..................................................................................................................18
6.1 Filters
6.2 Dryers
6.3 Ammonia Scrubber
6.4 Fuse
TABLE OF CONTENTS