Nilfisk-ALTO SCRUBTEC 770 S 05220G - Manual (Page 49)

Nilfi sk ALTO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 49 -
Nilfi sk ALTO
SCRUBTEC 770 / 784
Squeegee Assembly 12/09
Item Ref. No. Qty Description
10803KL Squeegee Asm.
1 25201B 2 Knob
2 34260B 1 Squeegee
Gasket
3 81301A 2 Nut, 3/8-16 Jam SS
4 30048A 2 Wheel, Gide 4” Diam.
5 53185A 2 Ring, 3/8 ID Snap
6 60272B 1 Channel, Sq. Weldment
7 30058A 1 Spacer, Squeegee
8 30069L 1 Blade, Rear Linatex (STD)
[ ] 30557A 1 Blade-Rear Gum Rubber (OPT)
9 80280A 2 Nut, Squeegee,Backup
10 80011A 2 Screw, 3/8-16 x 3
11 60252A 1 Strap, Clamp Sq. Ret.
12 930086 2 Rivet, 3/16 x .450 Alum.
13 50835A 1 Latch, Sq. Clamp
14 30717L1 1 Blade, Front Linatex (STD)
[ ] 30091A 1 Blade-Front Urethane (OPT)
15 60254A 2 Bolt, Shoulder 5/16 x 2 ¼
16 30049B 4 Wheel, Squeegee
17 81104A 2 Nut, ¼ -20
18 60243A 2 Bracket, Sq. Wheel
19 60358A 2 Shim, Squeegee Wheel
20 980657 4 Washer, ¼ Lock
21 962720 4 Screw, ¼ -20 x ½ Hex
NOTE: When changing squeegee blades, it might be necessary to loosen screw #10; install and secure blades with clamp #13; then retighten screw
#10. This will allow for different thickness.