Alpine 3DA-W882E - Manual (Page 51)

51
English Equalizer/Surround
Operation
1
EQ
2
3
1 2 3 4 5 6
1 2 3 4 5 6
Memorizing the
Equalizer Settings
Press the EQ button to select the desired
equalizer setting (factory preset or your own)
you wish to store in memory.
Within 5 seconds after operating step , press
and hold any one of the Preset buttons (
1
–
6 ) for at least 2 seconds. The indicators blink
for 5 seconds showing the unit is ready for
storing.
While the indicators are blinking, press the
Preset button (
1
–
6
) into which you wish
to store the selected equalization setting.
Repeat Steps to to store other settings.
The example shows the setting has been stored
at the Preset 2.
Note: You can store the BBE and Surround
settings as well as the Equalizer settings
in the Presets.
EQ SUR BBE
USER
PRESET