D.5.2. parameter programming for manual cycle – American Panel Blast Chiller BCIP User Manual
Page 24
PROGRAMMING
22
Use
and
buttons to increase or decrease the high air temperature (cut in)
setting for the first part of the cycle.
Press
when done.
Use
and
buttons to increase or decrease the low air temperature (cut out)
setting for the second part of the cycle.
Press
when done.
Use
and
buttons to increase or decrease the high air temperature (cut in)
setting for the first part of the cycle.
Press
when done.
Use
and
buttons to increase or decrease the temperature point at which the
controller will switch from the first part to the second part of the cycle.
Press
when done.
Use
and
buttons to increase or decrease the food temperature point at which
the controller will switch to third part of the cycle.
Press
when done.
Note: The third part of the cycle is the holding mode. After the food reaches the temperature at “SETTING 6” the unit will
keep the food at a safe temperature until it will be removed from the unit and stored.
Use
and
buttons to increase or decrease the low air temperature (cut out)
setting for the third part of the cycle.
Press
when done.
Use
and
buttons to increase or decrease the high air temperature (cut in)
setting for the third part of the cycle.
Press
when done. The controller will move to CHOOSE OPERATING CYCLE
screen. Press
to exit the programming mode, or choose another cycle to
program.
D.5.2. Parameter Programming For Manual Cycle
The controller will ask the operator to choose an operating cycle. Press
to set the
parameters for the manual cycle.
The display will show:
Use
and
buttons to increase or decrease the low air temperature (cut out)
setting for the first part of the cycle.
Press
when done. The controller will move to the next screen.
Use
and
buttons to increase or decrease the high air temperature (cut in)
setting for the first part of the cycle.
Press
when done.