Nova-Tech Atago DH-10C - DH-10F Digital Hyrdometer - Manual (Page 2)

How to Use
Specifications Example of Time and Cost Savings
Digital Hydrometer
DH-10C DH-10F
Cat.No.3447 Cat.No.3446
±0.002 (50 to 86°F)
±0.003 (32 to 50 or 86 to 104°F)
±0.005 (14 to 32 or 104 to 122°F)
14 to 122°F
41 to 104°F
DH-10C
Measurement range Sulfuric acid specific gravity 1.000 to 1.3000
Resolution 0.001
Accuracy
±0.002 (10 to 30°C)
±0.003 (0 to 10 or 30 to 40°C)
±0.005 (-10 to 0 or 40 to 50°C)
Sample
chamber temperature
-10 to 50°C
Ambient
temperature range
5 to 40°C
Power supply DC9V (006P Battery)
International
Protection class
IP64
Dimensions and weight 70 Ч 40 Ч 210 mm (Main unit only), 235 g
Cat. No. 3446
DH-10F
Cat. No. 3447
For determining the charge level of lead acid batteries commonly used as industrial battery banks.
Increased efficiency over a conventional
glass hydrometer and thermometer
A service tech visits 30 power systems a month. Using a
standard hydrometer, it takes him 20 minutes per
system to do the job. The DH-10 Digital Hydrometer
reduces the service time to 2 minutes per system.
The benefits are 108 hours = $4,320
of savings every year, per service tech.
His labor costs $40 /hour.
A standard glass hydrometer :
20 minutes × 30 sites = 10 hours, $400 worth of labor every month
DH-10 Digital Hydrometer:
2 minutes × 30 sites = 1 hour, $40 worth of labor every month
Easy
Operation
Pump
Sample
chamber
(prism)
Squeeze the
pump to create
a vacuum.
Release the
pump to draw
the sample in.
Press the START key,
and measurement is
complete in 3 seconds.
Squeeze,
Air Out
Release,
Sample In
Squeeze
& Release,
Easy Cleaning
(ex : DH-10C)
Face Panel
Headquarters: The Front Tower Shiba Koen, 23rd Floor
2-6-3 Shiba-koen, Minato-ku, Tokyo 105-0011, Japan
TEL : 81-3-3431-1943 FAX : 81-3-3431-1945
[email protected] http : //www.atago.net/
Office : 11811 NE 1st Street Suite 101 Bellevue, WA 98005 U.S.A.
TEL : 1-425-637-2107 FAX : 1-425-637-2110
[email protected]
TOLL FREE : 1-877-ATAGO-US ( 1-877-282-4687 )
1309K Printed in Japan USV.03
* Specifications and appearance are subject to change without notice.
ATAGO products comply with HACCP,GMP,
and GLP system standards.
All ATAGO refractometers are designed and manufactured in Japan.
[email protected]
www.novatech-usa.com
Tel: (866) 433-6682 Fax: (866) 433-6684
Tel: (281) 359-8538 Fax: (281) 359-0084