Nova-Tech WBW Series - Manual (Page 19)

© Adam Equipment Company 2009 17
13.0 PARAMETER SETTING
This section allows the user to access the parameters for customising the
scale. The parameters are split into 2 groups-
1. Check weighing Parameters
2. Scale Parameters
In the following sections use the
[Limit] key to scroll through the options, the
[Tare] key to accept the option and the [Zero] key to return to weighing.
Wherever numeric values are required to be entered, use the
[Limit] and
[Unit] keys to increment the flashing digits as explained in section 4.1.
13.1 CHECK WEIGHING PARAMETERS
To enter this section press and hold the [Limit] key for 4 seconds. You will
be asked for the password if the current check-weighing password is
anything other than “0000”. See the parameter “F4 PS” in this section. Enter
the correct password using the numeric entry method as mentioned in
section 4.1. If the password is “0000” it will go directly to “F1 LLK”.
Parameter Description Options Default setting
F1 LLk Limit Lock will prevent a normal
user from changing the check
weighing limits. To change the
limits, this parameter must be
disabled by setting it to off or the
user must enter the password. on
oFF oFF
F2 LEd Setting the LED on
oFF on
F3 bEP This parameter sets the Beeper to
off or on. If set to on, the beeper
can further be set to sound when
the weighing result is within or
outside the check-weighing limits. bP oFF
- Off
bP inL
- Within
limits
bP otL
- Outside
limits (>20d)
bP inL
F4 PS This parameter allows setting of a
new Check weighing password,
If the old parameter is “0000” enter
the new password twice when “
P1
_ _ _
“ & “
P2 _ _ _ _
” are displayed.
When complete, it will display
To be entered
manually.
0000