Asus P4BP-MX User Manual
Page 51
ASUS P4BP-MX 2.0 motherboard
2-19
Parallel Port Mode [SPP]
This field allows you to set the operation mode of the parallel port. [SPP] allows
normal-speed operation but in one direction only; [EPP] allows bidirectional parallel
port operation; [ECP] allows the parallel port to operate in bidirectional DMA mode;
[ECP+EPP] allows normal speed operation in a two-way mode. Configuration
options: [SPP] [EPP] [ECP] [ECP+EPP]
EPP Mode Select [EPP1.7]
Sets the parallel port DMA channel for the selected EPP mode. The default setting
is EPP1.7. Configuration options: [EPP1.9] [EPP1.7]
ECP Mode Use DMA [3]
Sets the parallel port DMA channel for the selected ECP mode. The default setting
is 3. Configuration options: [1] [3]
Onboard LAN Controller [Enabled]
Allows you to enable or disable the onboard LAN controller.
Configuration
options: [Disabled] [Enabled]
Onboard LAN Boot ROM [Disabled]
Allows you to enable or disable the boot ROM of the onboard LAN chip.
Configuration options: [Disabled] [Enabled]