Asus P4BP-MX - Manual (Page 48)

2-16 Chapter 2: BIOS information
Turbo Mode [Disabled]
Enables or disables the Turbo mode. Configuration options: [Enabled] [Disabled]
Memory Frequency for [Auto]
This item allows you set the FSB and system memory frequency. The default
setting is [Auto]. Configuration options: [PC100] [PC133] [Auto]
On-Chip Frame Buffer Size [8MB]
Sets the frame buffer size. Configuration options: [1MB] [8MB]
Hyper-Threading Technology [Disabled]
Disables or enables the Intel ® Hyper-Threading Technology feature.
Configuration options: [Disabled] [Enabled]
CPU Clock Ratio [8 X]
Allows you to key-in the ratio between the CPU core clock and the Front Side Bus
(FSB) frequency. To do so, highlight the item then press to display a
pop-up menu. Enter a value from the specified range, then press Enter. The
configuration option values depend on the CPU installed.
Auto Detect PCI Clk [Enabled]
Allows you to disable or enable the auto-detect function of the PCI clock. When
enabled, the bus speed is calculated based on the capacity of the device installed.
CPU Clock [100MHz]
This item allows you to set the CPU frequency. To do so, highlight the item then
press to display a pop-up menu. Enter a value from the specified range,
then press Enter. The configuration option values depend on the CPU installed.
Spread Spectrum [Disabled]
This field enables or disables the clock generator spread spectrum. Configuration
options: [Disabled] [+/- 0.1%] [+/- 0.2%] [+/- 0.3%] [+/- 0.4%] [+/- 0.5%] [+/- 0.6%]
[+/- 0.7%] [+/- 0.8%] [+/- 0.9%] [+/- 1.0%]
Limit CPUID MaxVal [Disabled]
Allows you to limit the CPUID maximum value. Set this item to Disabled, if you
installed Windows
® XP operating system.