Asus P5AD2-E User Manual

Page 50

2 - 2 8

C h a p t e r 2 : H a r d w a r e i n f o r m a t i o n

8 .

G A M E / M I D I p o r t c o n n e c t o r ( 1 6 - 1 p i n G A M E 1 )

This connector is for a GAME/MIDI port. Connect the USB/GAME
module cable to this connector, then install the module to a slot
opening at the back of the system chassis. The GAME/MIDI port
connects a joystick or game pad for playing games, and MIDI devices
for playing or editing audio files.

P5AD2-E

P5AD2-E GAME connector

GAME1

+5V

J2B1

J2CX

MIDI_OUT

J2CY

J2B2

MIDI_IN

J1B1

J1CX

GND

J1CY

J1B2

+5V

9 .

C h a s s i s i n t r u s i o n c o n n e c t o r ( 4 - 1 p i n C H A S S I S 1 )

C h a s s i s i n t r u s i o n c o n n e c t o r ( 4 - 1 p i n C H A S S I S 1 )
This connector is for a chassis-mounted intrusion detection sensor or
switch. Connect one end of the chassis intrusion sensor or switch
cable to this connector. The chassis intrusion sensor or switch sends a
high-level signal to this connector when a chassis component is
removed or replaced. The signal is then generated as a chassis
intrusion event.

By default, the pins labeled “Chassis Signal” and “Ground” are shorted
with a jumper cap. Remove the jumper caps only when you intend to
use the chassis intrusion detection feature.

P5AD2-E

P5AD2-E Chassis intrusion connector

CHASSIS1

+5VSB_MB

Chassis Signal

GND

(Default)

The GAME/MIDI cable is purchased separately.