NetMedia VS4X4 - Manual

NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: [email protected] www.netmedia.com
MAN-VS4X4 REV0705A
Factory Pins
For factory use only.
Power Connector
12V DC 300mA, center positive.
Selects 1-4 inputs for 1-4 separate outputs
Works as video switcher or splitter
Manual or automatic switching
Microprocessor controlled
Supports NTSC or PAL in color and B/W
Setup retained during power outage
Tough aluminum housing
Includes power supply
1 year limited warranty Dwell Time:
Video Bandwidth:
Video Crosstalk:
Video Output Connectors:
Video Input Connectors:
Power Requirement:
Power Connector:
Housing Size:
Weight: 1 to 255 seconds
12MHz
-70 db
4 - Female RCA, 75 Ohm
4 - Female RCA, 75 Ohm
12V DC, 300mA
5.5mm OD, 2.1mm ID, center positive
5.5“ long x 3.5” wide x 0.9“ high
8.5 oz.
(subject to change without notice)
FEATURES
Product Includes:
1. Video Switcher Assembly (4 Video Input Connectors, 4 Input LED’s, Input Select Button,
Rotation LED, 4 Video Output Connectors, 4 Output LED’s, Output Select Button, Dwell Time
LED, 10 Sec/Plus Button, 1 Sec/Minus Button, Label Area, Power Connector, Factory Pins).
2. 12V DC 300mA Power Transformer (Center Conductor Positive).
The NetMedia VS4X4 Video Matrix Switcher sends 4 video inputs to 4 different outputs. Each output can show a
single input or a rotating combination of inputs. The selected inputs and combinations may be the same or differ-
ent for each output. To use as a 4-way video distribution amplifier, setup Input 1 as the only source for all 4 outputs.
To setup one or more outputs as a sequencer, enable multiple inputs and select rotation mode. To setup one or
more outputs as a manual switcher, deselect rotation mode and choose the desired input.
SPECIFICATIONS
Video Matrix Switcher VS4X4
4 inputs with 4 programmable outputs
Input 1 LED
Indicates the selected
input and its status.
Label Area
Provides space for input
and output designators.
Output 1 LED
Indicates the selected
output and its status.
10 Sec/
Plus Button
Adds 10 sec to dwell time or
enables inputs and outputs.
Input Select Button
Chooses rotation mode or
individual input to
view/enable/disable.
Rotation LED
Indicates that selected
output is in rotation mode.
Output Select Button
Selects output to
program/enable/disable.
Dwell Time LED
Lights for 10 sec after
Rotation LED selected to
set dwell time.
1 Sec/
Minus Button
Adds 1 sec to dwell time or
disables inputs and outputs.
VS4X4
Video Output 1
Connects output device for
Output 1 LED
(2,3,4 follow).
Video Input 1
Connects input device for
Input 1 LED
(2,3,4 follow).