Vs4x4, Installation procedures – NetMedia VS4X4 User Manual
Page 2
VS4X4
NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: [email protected] www.netmedia.com
MAN-VS4X4 REV0705A
VS4X4
Figure 2 - Connecting the switcher to 1 video source and 4 video destinations. Switcher performs as simple video
distribution amplifier.
Figure 1 - Connecting the switcher to 4 video sources and 4 video destinations. Each destination can view any
manually switchable input or different automatically sequencing combinations of inputs.
Installation Procedures:
1. Connect video sources to Video Input Connectors (Input 4 is furthest from Power Connector).
2. Connect video destinations to Video Output Connectors (Output 1 is closest to Power Connector).
3. Connect the 12V DC 300mA power supply to an AC outlet.
4. Press Output Select Button until desired Output LED is lit. Press 10 Sec/Plus Button to enable output (LED
on). Press 1 Sec/Minus Button to disable output (LED flashes).
5. Press Input Select Button until desired Input LED is lit. Press 10 Sec/Plus Button to enable input (LED on).
Press 1 Sec/Minus Button to disable input (LED flashes). Repeat for each input.
6. To enable rotation mode, press Input Select Button until Rotation LED is lit. To set/change dwell time,
press 10 Sec/Add or 1 Sec/Remove Buttons while Dwell Set LED is lit (time starts from 0 once program-
ming begins). To disable rotation mode, press the Input Select Button until desired Input LED is lit.
7. Repeat steps 4 - 6 for each output. Settings are automatically saved every 10 seconds after a change (all
lit LED’s quickly flash once).
Output 4
Output 3
Output 2
Output 1
Input 1
1
1
2
3
4
Power
Output 1
Output 2
Output 3
Output 4
Input 1
Input 2
Input 3
Input 4
1
1
2
2
3
3
4
4
Power
DVR
Modulator
MPEG-4
Web Server
Monitor or
Television
DVR
Modulator
MPEG-4
Web Server
Monitor or
Television