Diamond Products FZ-2S - Manual (Page 25)

5.9 Release of the carriage guides
•
Push turnkey lock with thumb and simulta-
neously...
•
...turn Y-handle counter-clockwise
5.10 Mounting blade and blade guard
or flush cutting flange
If the saw blade is not mounted
correctly it can get loose and
harm people seriously!
When the power unit is running
or even the hoses are under
pressure a blade can start to
turn suddenly and harm people
seriously!
•
Always turn off and plug out the power unit
and relieve the pressure from the hoses.
Preparations
•
Move the swivel arm to the uppermost posi-
tion
•
Mount the saw blade so that the arrow po-
ints counter-clockwise.
Mounting saw blade and blade guard
ThÃiyhqr
! ThÃiyhqrÃp‚‰r
# 6yyrÃuhrqÆp r†ГH'‘ %Г !(
$ 7yhqrÃuˆi
% Cr‘ht‚ÃurhqÃphƒÃ†p rÃH %‘"
Fig.Y_FUERG3.tif
Fig. fz4-5.tif
Fig. funktion.tif
Aa!T Tr‡ˆƒ
FZ_29811 Page 25