Diamond Products FZ-2S - Manual (Page 17)

5.3 Choosing the saw blade
Select the saw blade with the required diame-
ter with regard to the requirements both of cut
and of technical conditions.
Which saw blades are to be used?
outer Ø: 450 - 2200 mm
inner Ø: 60 H7 mm
Fastening: Blade cover with central lockscrew
or
6xM8, screw hole circle Ø 80mm
with blade flange
Which depth of cut is to be reached?
Table "Depths of cut" shows, which saw blade
diameter is to be selected for a given depth of
cut.
Saw blades of a diameter of more than
1000 mm can only be mounted after a
correspondingly deep cut made by a
smaller saw blade.
Aa!T Tr‡ˆƒ
FZ_29811 Page 17