Diamond Products CB18BV-XL - Manual (Page 19)

 Always wear appropriate safety equipment such as goggles, ear protection, head
protection and safety shoes. Certain tools used in conjunction with the power unit may
require other safety equipment such as breathing filters.
 Keep clear of hot engine exhaust.
 Do not add fuel to the power unit while the power unit is still running or is still hot.
 Do not operate the power unit if a gasoline odor is present.
 Do not use flammable solvents around the power unit engine.
 Do not operate the power unit within 3 ft. (1 meter) of buildings or flammable objects.
 Allow the engine to cool before storing the unit in an enclosed area.
 To avoid personal injury or equipment damage, all tool repair, maintenance and service
must only be performed by authorized and properly trained personnel.
IMPORTANT: The red stop button at the front panel will immediately stop the engine.
Hydraulic pressure and flow will go to zero. This button must be in the out position to
start the unit.
DANGER: Improper use or alteration of this equipment may be extremely hazardous.
SAFETY SYMBOLS
Safety symbols are used to emphasize actions which could result in a life-threatening
situation, bodily injury, or damage to equipment.
Always observe safety symbols. They are included for your safety and for the protection of
the tool.
This safety symbol appears
in these instructions to identify
an action that could cause bodily
injury to the operator or to other
threatening situation.
This safety symbol may appear
on the tool. It is used to alert the
operator of an action that could
place him/her or others in a life
threatening situation
.
This safety symbol appears in
these instructions to identify an
an action or condition that could
result in damage to the tool or
other equipment.
!WARNING : ! ! IMPORTANT ! ! DANGER !
19