Detroit Radiant Products Company SW Series - Manual (Page 6)

SW Series Manual
6
1.0 Safety • Clearance to Combustibles
Side
Model
Wattage
Mounting
Angle
Front Behind* End Top Below
1,600
0° 24 24 24 6 40
45° 40 24 24 10 40
2,500
0° 24 24 24 6 46
45° 46 24 24 10 46
3,200
0° 24 24 24 6 56
45° 56 24 24 10 56
3,650
3,800 0° 24 24 24 6 62
45° 62 24 24 10 62
4,800
0° 24 24 24 6 72
45° 72 24 24 10 72
5,000
0° 24 24 24 6 72
45° 72 24 24 10 72
7,300
0° 24 24 24 6 84
45° 84 24 24 10 84
7,500
7,600 0° 24 24 24 6 84
45° 84 24 24 10 84
10,950
11,400
0° 24 24 24 6 96
45° 96 24 24 10 96
*A minimum clearance of 36 inches must be maintained from behind another heater.
NOTE: Ensure that building materials with a low heat tolerance (i.e, awnings, fabrics, plastics, sprinklers,
insulation, etc.) are protected against degradation. This may require the heater to be mounted at a
distance in excess of the published clearances to combustibles. Contact the material manufacturer for
specific details.
SIDE SIDE
BELOW
TOP
Figure 1.1 • Clearance to Combustibles
END
TOP VIEW • 0°
END
FRONT
BELOW
BEHIND
TOP
Chart 1.1 • Clearance to Combustibles in Inches (see Figure 1.1)
END VIEW
45° Mounting Angle
END VIEW
0° Mounting Angle