Multichannel Systems TC01-TC02 Manual - Manual (Page 21)

Installation and Operation
17
Firmware Upgrade
If you like to use a device from Multi Channel Systems MCS GmbH, which is not available in the
settings of your temperature controller ( for example, the TCW1), you probably need to upgrade
the software and the firmware, and you have to reset in the TCX.
1. Software: Install the appropriate software version (for example TCX-Control software
Version 1.3.2 and higher).
2. Firmware: Click "Show extended information" in the main menu of the TCX-Control
program. Additional windows appear, click button "Firmware Updates".
3. The "Firmware Update" dialog appears.
4. Click the enabled buttons "Update" if necessary, one after the other. The firmware
is adapted automatically. The status will be displayed in the status bars.
5. Reset the TCX: In the main menu display of the temperature controller select "Setup"
and "Factory Reset" to apply the new firmware with MCS default settings for all devices,
respectively.