Multichannel Systems PPS2 Manual User Manual

Page 9

Text mode
Original mode

PPS2 Manual

Complete Setup

The left pump of the PPS2 is intended for perfusion inlet, the right one for perfusion outlet.
Please connect all tubing and droplet isolators as indicated on the following image. Take
care to use the short Pharmed ® BPT tube between outlet pump and droplet isolator.

Warning: The droplet isolators remove pulsation artifacts, but also cause a continuing
flow even some time after the pumps are stopped. To avoid flooding, please use hose
clamps to stop the flow. Do not forget to open the clamps when you restart the pump.