Multichannel Systems HiClamp Manual - Manual (Page 38)

HiClamp Manual
32
Loop no increment
The loop with no increment acts almost similarly to the loop. However, at difference with the loop
with increment, this loop causes no modification of the compound to be measured. This loop can
be used to measure a multiple number of time the same compound.
Another important difference between loop with increment and without increment is observed
in the loop associated window. In the loop without increment the user can set up a list of numbers
(lower editable panel) indicating the number of times the loop will be executed for each passages.
If the list contains less entry than the number of compounds the list will be repeated. In this
example the first compound will be measured four times, the second three times and the third
one time.