Multichannel Systems TC01-2 Manual - Manual (Page 21)

Installation and Operation
17
Firmware Upgrade
If you like to use a device from Multi Channel Systems MCS GmbH, which is not available in the
settings of your temperature controller ( for example, the TCW1), you probably need to upgrade
the software and the firmware, and you have to reset in the TCX.
1. Software: Install the appropriate software version (for example for TCW1, TCX-Control
software Version 1.1.9 and higher).
2. Firmware: Click Show extended information in the main menu of the TCX-Control
program. Three additional windows appear, labeled with "New" if firmware upgrade
is necessary. Click the enabled buttons "Update" one after the other. The firmware
is adapted automatically.
3. Reset the TCX: In the main menu display of the temperature controller select "Setup"
and "Factory Reset" to apply the new firmware with MCS default settings for all devices,
including TCW1 respectively.