MIDLAND NT3 - Manual (Page 5)

Model NT3 Series
Page 5 midlandusa.com
CONTROLS
LCD DISPLAY
1. VOX ICON - Indicates when eVOX
mode is active.
2. TRANSMIT (TX) ICON - Indicates
radio is transmitting a signal.
3. LOW BATTERY ICON - Indicates
battery level is low.
4. CHANNEL NUMBER - Changes from
1~88a on VHF Marine band (1~10 on
WX band).
5. USA/CAN/INT CHANNEL ICONS
6. KEY LOCK ICON - Indicates KEY
LOCK mode is on.
7. WX BAND ICON - Indicates when the
radio is in Weather Band mode
8. TRANSMIT POWER LEVEL (Hi / LO)
ICON - Indicates TX Power setting.
9. RECEIVE (RX) ICON - Indicates radio
is receiving a transmission.
10. POWER/VOLUME KNOB - Turn
clock wise to turn the power on and
increase the volume level. Turn
counter-clockwise to decrease the
volume level and turn the power off.
11. PTT Button - Press and hold to
transmit voice communication. Press
twice quickly to send a call alert.
12. CH 9/16 Button - Press to switch
immediately to emergency channel
16. Press and hold to switch to
Channel 9.
13. MENU Button - Press to access
MENU mode. Press and hold to go to
WX Band Receiver mode.
14. MIC - Built-in microphone.
15. ANTENNA.
16. EXTERNAL SPEAKER/MIC JACK.
17. MONITOR/SCAN Button - Press to
enter SCAN mode. Press and hold to
enter MONITOR mode.
18. UP/DOWN Button - Make
adjustments in MENU mode.
19. SPEAKER - Built-in speaker.