MIDLAND NT3 - Manual (Page 10)

Model NT3 Series
Page 10 midlandusa.com
KEYPAD LOCK
To avoid accidentally changing the radio setting, press the MENU
button 4 times then press an up/down button to choose ON. The
KEY LOCK icon will appear on the display. PTT and CH16 will still
be active. To unlock the keypad, press the MENU button once, then
press the ▼/▲ button to choose OF.
DISPLAY ILLUMINATION
During Power on, the display illumination will activate for approx. 7
seconds. The display illumination can also be activated when the
MENU button is pressed.
CHANNEL SELECTION
Press the MENU button once, and then the ▼/▲ buttons to select
one of the channels. To confirm the selection, press the PTT button
or press MENU again to move to the next feature setting.
TRANSMIT (TX) POWER LEVEL SELECTION
The NAUTICO3 has 2 transmit power level settings. To select the
power level on channels press the MENU button two times, a “Pr”
icon will appear blinking on the display. Then press the ▼/▲ button to
select TRANSMIT POWER LEVEL icon (Hi / LO). The TX icon will be
blank when Hi setting is selected. To confirm, press the PTT button or
press MENU again to move to the next feature setting.
eVOX (Hands-free Transmission)
Your NAUTICO3 has 2 eVOX level settings: (oF/1/2). To set eVOX,
press the MENU button three times. The display shows “eVOX”
blinking while on the right of the CHANNEL NUMBER display, an
“ oF” icon appears. Select “1” or “2” by pressing ▼/▲ the buttons
and push the PTT key, or press MENU again to move to the next
feature setting.
eVOX will be more sensitive on the “2” setting than on the “1” setting.
To turn
eVOX off, press the MENU button three times. The display
shows “ VOX” blinking. Select “oF” by pressing the ▼/▲ buttons and
push the PTT key, or press MENU to move to the next feature setting.