Indications, Battery status, Memory card led status – MIDLAND XTC 400 User Manual
Page 7: Front led status, Switch position, Recording time, Sounds

7
midlandusa.com
Indications
Switch Position
Position
Meaning
Wi-Fi Up (On)
Wi-Fi Enabled
Wi-Fi Down
Wi-Fi Disabled
Light Setting Up (N)
Normal Light Mode
Light Setting Down (L)
Low LIght Mode
Resolution Up (H)
Record at 1080p30
Resolution Down (L)
Record at 720p60
Recording Time
Memory Size
720 Record
Time
1080 Record
Time
512 MB
6.5 Minutes
5.5 Minutes
1 GB
13 Minutes
11 Minutes
2 GB
26 Minutes
22 Minutes
4 GB
52 Minutes
44 Minutes
8 GB
104 Minutes
88 Minutes
16 GB
208 Minutes
176 Minutes
32 GB
416 Minutes
352 Minutes
64 GB
832 Minutes
704 Minutes
Note: The camera automatically splits the video into 29 minute
segments.
Sounds
Sounds
Meaning
1 Beep
Power on (Wi-Fi Off)
2 x 2 Beeps
Power on (Wi-Fi On)
3 Beeps
Start Recording
5 x 3 Beeps
Memory Card Full
2 Beeps
Power Off
1 Beep (Wi-Fi On)
App Confirmation
4 Beeps
Formatting Memory Card
Note: The beeps can be turned off via smartphone app.
Indications
Battery Status
Battery LED
Meaning
Solid Blue
Full battery level
(Fully charged)
Blinking Blue
Medium battery level
(Battery Charging)
Solid Red
Low battery level
Blinking Red*
Battery level too low
No Light
Battery is depleted
*Note: When the red battery LED begins blinking, be prepared to
charge the battery because the camera will stop recording at this
point.
Memory Card LED Status
Memory Card LED
Meaning
Solid Blue
66% - 100% Available
Blinking Blue
33% - 66% Available
Solid Red
0% - 33% Available
Blinking Red
0% Available
No Light
No Card / Card Error
Blinking
Red / Blue
Formatting
Upgrading Firmware
Front LED Status
Front LED
Meaning
Blinking Green
Recording 1080p
Blinking Blue
Recording 720p
Blinking Red
Recording WVGA
Solid Blue
Wi-Fi Enabling
Solid Green
Wi-Fi On
Solid Red
USB Connected