MIDLAND XTC 400 - Manual (Page 4)

4 midlandusa.com
Removing the Battery
1
2
3
1. Press the lock release to the left. Slide the door upwards.
2. Pull the door open.
3. After rotating the latch counter-clockwise, the battery can easily be
removed.
Reformatting the Micro SD card
The micro SD card can be reformatted while in the camera. This allows
you to completely delete all the files at one time. Follow these steps:
1. Press and hold the format button
2. Move the RECORD switch to the forward/ON position.
3. The camera will beep 4 times and the icon will alternate blinking
red and blue
When complete, the camera will beep twice, then turn off.
Rotating Lens
To maintain upright orientation for your video when the camera is
mounted at an angle, the XTC400’s lens can rotate 180° in one direction
and -90° in the other. There are indentations every 90° to enable you to
twist the lens into place at commonly used angles.
External Microphone
To connect your camera to an external microphone, first open the
rubber cover and then insert the 3.5 mm microphone jack into the
plug. If you are using a headset, the left speaker will be used as the
microphone. In addition, you may also connect a music player to directly
record music to your video.
Battery
The included lithium-ion battery comes partially charged. To charge,
connect the included micro USB cable to camera and connect the other
end of the cable to a power source such as a computer, wall charger or
vehicle charger. No damage will occur to the camera or battery if used
prior to a full charge. See page 7 for battery status indications.