Backlight color selection, Beep on/off, Keypad lock function setting – MIDLAND CT710 - 2014 User Manual
Page 51
CT710 Instruction Guide
| 21
The screen will show
“007 LED?”
. Press
ENTER
and you will see on
the display
”ON”
(backlight on). Turn the encoder to select
“ON” “OFF”
“AUTO”
.
Press
ENTER
to confirm, and
VFO/MR
to exit.
Backlight Color Selection
In channel/frequency mode, press
MENU
and
8COLOR
: the display will
show
“008 LIGHT?”
.
Press
ENTER
and by turning the encoder, you have the color options:
“ORANGE”
,
“PURPLE”
,
“BLUE”
.
Press
ENTER
to confirm the desired backlight color and
VFO/MR
to exit.
Beep On/Off
If you enable this function, every time a button is pressed, you will hear
a Beep tone.
In channel/frequency mode, press
MENU
and
9BEEP
:
“009 BEEP?”
will
appear on the display.
Press
ENTER
:
“ON”
means beep on,
“OFF”
means beep off; turn the enco-
der to choose one of the two options. Press
ENTER
to confirm and
VFO/
MR
to exit.
Keypad Lock Function Setting
This function is useful to lock the keypad and so, avoid any accidental
pressure of the buttons.
Press
MENU
and turn the encoder to item 11: the screen will display
“011 KEYBO?”
.
This transceiver has 2 types of Keypad lock available: Auto-lock and Ma-
nual-lock.
Press
ENTER
: the display will show
“AUTO”
(keypad lock turns on auto-
matically).
Turn the encoder to select
“MANUAL/AUTO”
, then press
ENTER
to
confirm and
VFO/MR
to exit.
You can also press
*LOCK
: the display will show
“LOCK?”
.
If you want to lock the keypad hold down
*LOCK
for 2 seconds. To unlock
the keypad, press
*LOCK
again for 2 seconds: the keypad will be unlo-
cked.