MIDLAND G12 - Manual (Page 8)

8
English
3.2 Symbols on the display
The liquid crystal display of your PMR446 transceiver constantly
displays the operating status of the device and the function currently
in use. Possible symbols and their setting are described below:
Symbol Meaning Description Ref.
Battery charge
level
Shows remaining level of battery
charge.
5.3
Signal strength During reception the level of
signal strength is shown on the
basis of the number of bars
displayed. During broadcast all
bars flash.
5.6.b
Radio channel
/multifunction
When in standby, these three
large digits show the channel
currently selected. During
programming they show
different parameters and their
values (e.g. = level of power
transmission).
5.5
Power Save It shows when power save is
active
5.6.a
Multifunction
indicator
When in standby, the small
digits to the right of the display
show the CTCSS tone or DCS
code currently set (e.g. =
tone CTCSS Num. 16). During
transmission it shows different
parameters and their values
accordingly. For example
means ON (function is active)
and means OFF (function is
disabled).
5.7
Low power
transmission
Lower power transmission is
selected.
5.9
Keypad locked Keypad is locked. 5.10
VOX VOX function is active (Voice
Operated eXchange) - it enables
hands free use of your device.
6.2
Channel
scanning
Channel scanning is taking
place (automatic signal search)
on the preset channels.
6.3
Call vibrate Call vibration is active 6.4
Dual watch Dual Watch (quick search of
signals on two channels) is
active.
6.5
Timeout Timer Timeout Timer is active. 6.8
Programming The device is in programming
mode.
7.1