MIDLAND CT510 - Manual (Page 41)

Instruction Guide Midland CT510 | 41
Operating modes
Frquency Mode “VFO”
In this mode, you can use the POWER/DIAL knob to change the fre-
quency or input the frequency by keypad directly.
Memory Mode “MR”
Under VFO mode, if you have stored one memory channel at least, press
VFO to enter Memory mode MR.
The display will show the frequency and the channel number at the left
top.
Channel Mode “CH”
When you have stored one memory channel at least, turn on the radio
while keeping pressed ENT: you enter CH mode.
Modo FM
CT 510 operates also on the FM radio frequency FM: 88.00 – 108.00 MHz.
To set the scan frequency range and store your favorite channels, see
paragraph “Shortcut operations”, step 7.
MENU mode
To enter MENU mode, press F/ and ENT. The options to choose are 26 in
total. See chapter “Menu operations”.