Select the frequency step, Select the ctcss and dcs tones – MIDLAND CT 210_410 User Manual
Page 13
E
N
G
L
IS
H
13
To.select.the.repeater.shift.you.can.use.the.fast.menu:.press.
the.
.key.and.then.
.and.follow.the.procedure.above.
described.starting.from.point.3.
Repeater shift adjustment
(for communications through repeaters)
1..press.the.
.button;
2..turn. the.
Encoder. knob. until ‘DIFFR’ (menu. 15). is.
displayed
3..push.
;
4..turn. the.
Encoder. knob. and. select. the. repeater. shift..You.
can.also.enable.it.by.digiting.the.frequency.directly.on.the.
keypad.
5..press.
;
Select the frequency step
1..press.the.
.button;
2..turn.the.
Encoder.knob.until.‘STEP’ (menu.20).is.displayed
3..push.
;
4..turn. the.
Encoder. knob. and. select. the. desired. frequency.
step..You.can.choose.amongst:.5.KHz,.10.KHz,.6.25.KHz,.
12.5.KHz.and.25.KHz;
5..press.twice.the.
.knob.to.exit
Select the CTCSS and DCS tones
To select a CTCSS tone
1..press.the.
.button;
2..turn. the.
Encoder. knob. until. ‘C-CDC’ (menu. 16). is.
displayed
3..push.
;
4..turn. the.
Encoder. knob. and. select. the. desired. subaudio.
tone;
5..press.
.to.confirm.
To select a DCS tone:
1..select.‘C-CDC’.(menu.16).either.with.the.Encoder.knob.or.
with.the.fast.access;
2..Press.
3..Press.the.
.button;
4..turn.the.
Encoder.knob.and.select.the.desired.DCS.level;
5..press.
.again.for.confirmation.