Wide/narrow band, Roger beep, To save/delete a channel – MIDLAND CT710 User Manual
Page 13
24 |
CT710 Instruction Guide
CT710 Instruction Guide
| 25
Wide/Narrow Band
In channel/frequency mode, press
MenU
and turn the encoder to item
21:
“021 N/W?”
will be displayed. Press
enTer
and the display will show
“WIDE”
(wide band).
Turn the encoder to select
“NARROW/WIDE”
and confirm by pressing
enTer
. Press
VFO/Mr
to exit.
Roger Beep
In channel/frequency mode, press
MenU
and turn the encoder to item
22:
“022 ROGER?”
will be displayed.
Press
enTer
and you will see on the display
“ROGER”
(roger beep off);
turn the encoder to select
“OFF /ON”
; press
enTer
to confirm and
VFO/
Mr
to exit.
To Save/delete a channel
• saving a channel
In frequency mode select the desired frequency or any other items
(like CTCSS, DCS, potential difference , frequency difference direction).
Press
MenU
and then
VFO/Mr
keys.
The channel to store blinks on the left bottom of the display. Turn en-
coder or select the number (from 1 to 128).
Press
VFO/Mr
key to complete the channel storage, and return to the
state of the frequency mode.
• Deleting a channel
Delete one programmed channel
Turn off the radio. Turn it on again while keeping pressed the
VFO/Mr
key at the same time.
”001 DEL?”
will be displayed. Turn the encoder to delete the chan-
nel number (from 1 to 128).
Select the channel number that must be deleted (rotate encoder).
Press the
enTer
key and the display shows:
“001 YES?”
.
If you really want to delete this channel, press
enTer
to confirm; if you
don’t want to delete it, press
VFO/Mr
to exit.
• reset
Delete the parameters of frequency mode (Reset VFO)
Turn on the radio while keeping pressed the
MenU
key at the same
time. The display will show
“RESET?”.
Press the
enTer
key, the LCD will show
“VFO?”
.
Press
enTer
to confirm and all the settings of frequency mode will be
deleted.
Delete all contents of frequency mode and channel mode (Reset FULL)
Turn on the radio while keeping pressed the
MenU
key at the same
time. The display will show
“RESET?”
.
Press the
enTer
key, the LCD will show
“VFO?”
.
Rotate the encoder and choose
“FULL?”
, then press
enTer
as confir-
mation. All settings of channel and frequency mode will be deleted.