MIDLAND BT Ski User Manual

Page 4

Fitting and removing your Midland BTSKI
The

BTSKI can be easily fitted by sliding it

downwards so that it fits into the slot of the

fixing device.

BTSKI is maintained in position thanks to the

fixing clip located on the upper section (A).

To detach the

BTSKI, simply press the fixing

clip and push the unit upwards.

Using the BTSKI without helmet
After have fixed your

BTSKI on its suitable tool

and have inserted the audio kit plug into the

central socket, wear your headset as shown in

the figure. Please, be sure to have placed the

microphone in the right way, with the white sign

oriented towards your mouth.

Using the BTSKI with a semi-rigid helmet
To place the

BTSKI into a semi-rigid helmet

you should first of all remove the little triangular

pads, used to cover the ears in most of helmets

on sale, and then put your helmet directly on the

BTSKI device.

If your helmet is not equipped with the two

removable pads, you could anyway mount your

BTSKI system by using the supplied Velcro-

band. Be sure to fix the Velcro-band as shown

in the figure.