MIDLAND BT Ski User Manual

Page 15

Exit SETUP mode

While in Setup mode, double click the Control button. The

Red light will turn off and the Blue light starts flashing.

Pairing a Phone

While in Setup mode, press the Control button until the

LED light flash Red and Blue alternately

Pairing your BTSKI with another BTSKI

device

While in Setup mode, press the Volume + on one unit (the

light will flash Red and Blue alternately), press the Volu-

me- on the other unit (the light will flash Red and Blue

alternately). On a successful pairing, both light turn to Blue

for one second.

Reset all paired devices

While in Setup mode, long press he Volume + and he Vo-

lume -. On a successful reset, the Blue light will turn on

for two second.

SPECIAL SETUP CONFIGURATION
Change VOX sensitivity or disable it

While in Setup mode, press short the Control and VOL+

buttons (blue light on). Now, press “Volume +” or “Volume-“

to increase or reduce sensitivity. Double click the Control

button to visualize the VOX status. Go back to the SETUP

mode (Red light always on).

VOX STATUS (Blue light flashing):

Once = VOX disable

Twice = very low sensitivity

3 times = low sensitivity

4 times = medium sensitivity.

5 times = high sensitivity

Wired connection always on

Enabling: In “Setup” mode, press the “Volume+” and “Vo-

lume -” buttons for one second. The blue LED will flash

once.

Disabling: Follow the same procedure up described; now

the blue LED will flash twice