Minuteman PORT A SCRUB 14 - Manual (Page 17)

17
Maintenance work
Compliance with our recommendations concerning maintenance work will give you the certitude always having a
machine at your disposal, which is ready to work and in good operating condition.
It is better to take precautions than to repair damages - and less expensive! Please contact your local contract dealer;
the people there will be glad to perform that work for you. There well trained personnel and genuine spare parts are at
your disposal. In case of any inquiries or orders for spare parts, please always quote the machine's serial number
indicated on the nameplate. The nameplate is located at the rear side of the machine.
Turn the machine off and disconnect the mains plug before cleaning or maintaining the machine.
Before proceeding to the maintenance and/or inspection or repair works mentioned in
following, execute a functional check of all operating elements and units in order to detect
Eventual failures. After repair work has finished, operate the machine after having performed a
safety check only.
For safety reasons, secure the lifted tank lid against inadvertently closing or lowering during all cleaning or maintenance
work in or at the tank. Operate the machine only with all safety devices being fitted and in protective position. Do not
proceed to cleaning by hand but use appropriate tools or auxiliary means. Maintenance or repair work has to be done
using appropriate tools and by qualified personnel only. For safety reasons use genuine spare parts.
Maintenance
Brushes Intended Use
Brush, PA Smooth floor
Brush, PP Medium Smooth Floor
Brush,Silicon Carbide Hard Floor