Minuteman E17_E20_H20 Walk-Behind Scrubber Disc Traction Drive User Manual

Page 14

Text mode
Original mode

Machine Overview

Rear Squeegee

A Squeegee
B Star-shaped knob
C Adjusting screw for angle adjustment
D Suction hose
E Blade fastening latch
F Washers for caster height adjustment
G Caster Wheel Axle

Cleaning the Squeegee

Check the squeegee (A) daily and clean as
necessary.

1. Pull off the suction hose (D).
2. loosen the two star-shaped knobs (B).
3. Remove the squeegee (A).

Changing the Squeegee Blades

Check the inner and outer squeegee blades on
the squeegee (A) weekly for signs of wear. The
squeegee blades can be reused by turning them
(can be turned for 4 total uses).

1. Pull off the suction hose (D), loosen the two star-

shaped knobs (B) and remove the squeegee.

2. Unlock the fastening device (E) and remove the

outer squeegee blade. Turn the squeegee blade
or install a new one, as necessary. Change the

inner squeegee blade in the same way.