Minuteman E24 (7061.31) Walk-Behind Scrubber - Manual (Page 35)

35
Maintenance and Care
5.7 Disc Brush Deck
1 Brush deck lift pedal
2 Brush deck
3 Brush ejectors
4 Roller bumper
5 Sealing strip
5.7.1 Cleaning Brushes
Clean brushes of the brush deck (Fig. 10/2)
at daily intervals or as required.
1. Use pedal (Fig. 10/1) to lift up brush deck.
2. Press brush ejectors (Fig. 10/3) down to
remove brushes for cleaning.
5.7.2 Changing Brushes
Check brushes of the brush deck for wearing
at weekly intervals. Replace brushes if
bristles are worn down to a length of 5/8".
1. Use pedal (Fig. 10/1) to lift up brush deck.
2. Press brush ejectors (Fig. 10/3) down to
remove old brushes.
3. Push new brush under brush deck and use
both hands to press it into seating.
5.7.3 Changing Roller Bumper
Check roller bumper (Fig. 10/4) at weekly
intervals or replace as required.
5.7.4 Changing Sealing Strip
Check sealing strip (Fig. 10/5) at weekly
intervals or as required. Before doing so,
open toggle-type fastener and remove
sealing strip.
1 2
3 4 5
Fig.10